Serators - V50 Integral Shank
Long Edge Roughing Mills 1.980 - 2.980 Dia.
- - .020 Undersize for finishing
- - Serrated insert edge reduces tool pressure
IMPORTANT:
- High Pressure Flood Coolant or Air Blast Required to Disperse Chip and cool the tool.
- Recutting chips will cause early insert failure
| Tool Info. V-50 Integral Serators |
||||||||
| Tool # | D | Flutes | Inserts | L | L.O.C. | Inserts | Screw | Wrench |
| V50-203 | 1.980 | 4-2 Effective | 28 | 6.000 | 3.600 | SNMC-444B SNGC-444H SNMC-443P |
838T | T-20 |
| V50-205 | 1.980 | 3-1.5 Effective | 30 | 8.000 | 5.100 | |||
| V50-253 | 2.480 | 4-2 Effective | 28 | 6.000 | 3.600 | |||
| V50-256 | 2.480 | 4-2 Effective | 48 | 8.000 | 6.100 | |||
| V50-303 | 2.980 | 4-2 Effective | 28 | 6.000 | 3.600 | |||
| V50-306 | 2.980 | 4-2 Effective | 48 | 8.000 | 6.100 | |||
Insert Info.
Three insert styles to choose from
- "B" - Style Insert: General purpose roughing insert with serrations molded on the side of the insert.
- "H" - Style Insert: Roughing inserts with serrations molded on the top of the insert and periphery ground for Titanium, Stainless & Nickel
- "P"- Style Insert: Molded positive top Semi- Finishing insert with no serrations.
| Insert Info. V-50 Integral Serators |
||||
| SNMC - B Inserts | ||||
| Insert # | I.C. | T | R | Grade |
| SNMC-444B | .500 | .250 | .062 | K11 |
| SNGC - H Inserts | ||||
| Insert # | I.C. | T | R | Grade |
| SNGC-444H | .500 | .250 | .062 | X33 |
| SNMC - P Inserts | ||||
| Insert # | I.C. | T | R | Grades |
| SNMC-443P | .500 | .250 | .047 | C55 / K11 |
Technical Data
| Speed and Feed Info. V-50 Integral Serators |
||
| Material | S.F.M. | I.P.T. |
| Mild & Low Carbon Steel Ex. 1018, 1020, 1117, 1141, 12L14 |
600 - 1200 | .002 - .006 |
| High
Carbon & Alloy Steel Ex. 1045, 4140, 4340, 52100, 8620 |
500 - 800 | .002 - .004 |
| Lower
Carbon Tool Steel Ex. P-20, H-13, S-7 |
400 - 700 | .002 - .004 |
| Tool
Steel Ex. A-2, A-6, D-2, M-2 |
300 - 600 | .002 - .004 |
| Stainless
Steel Ex. 304, 316, 420, 15-5PH, 17-4PH |
300 - 600 | .002 - .004 |
| Iron Ex. Cast, Ductile, Nodular |
600 - 1000 | .003 - .006 |
| Nickel
& Titanium Alloy Ex. Inconel, Hastelloy, TI-6AL-4V |
100 - 180 | .001 - .003 |
| Insert Grade Selection | ||
| Material | Material Examples | Preferred Grade |
| Mild & Low Carbon Steels | 1018, 1020, 1117, 1141, 12L14 | K11 or X33 |
| High Carbon & Alloy Steels | 1045, 4140, 4340, 52100, 8620 | K11 or X33 |
| Lower Carbon Tool Steels | P-20, H-13, S-7 | K11 or X33 |
| Tool Steels | A-2, A-6, D-2, M-2 | K11 or X33 |
| Stainless Steels | 303, 304, 316, 420, 15-5PH, 17-4PH | K11 or X33 |
| Iron | Cast, Nodular | C55 / K11 |
| Iron | Ductile | K11 or X33 |
| Nickel & Titanium Alloys | Inconel, Hastelloy, TI-6AL-4V | K11 or X33 |
| Insert Grade Description | ||
| Grade | Description | |
| K11 | Universal High Performance Dense Coating | |
| X33 | High Performance Nitride | |
| C55 | Advanced Multi-Layer PVD Coated Carbide | |
